This guide will assist growers in setting up multiple fixtures from Telos’ Pro Mesh generation, their current range of grow lights.
A single Telos Growcast can control multiple connected lights by daisy-chaining the output signal. This means that the PPF setting, and schedule will be synchronised across all the lights which are wired together.
Install the Growcast into the dimming input port of the fixture as described in the user manual. Then, use control linking cables to link from the dimming output port of the first fixture to the dimming input port of the second fixture and so on. Always refer to the manufacturer’s recommendations when daisy chaining fixtures together. See diagram below.
In this example, the Growcast is used to power 3 x 600w bar lights in a single area. For this set-up, growers will need:
This will provide single channel control and will synchronise PPF (dimming) and scheduling settings across all 3 units.
To control multiple rooms or grow areas, additional Growcasts can be added for each individual area and unique settings can be applied to each different grow room to accommodate for the various stages of plant growth, such as vegetative and flowering rooms.
